M150 Easy Dryer
The ultimate self-propelled jet dryer for companies conducting line marking, tape removal and crack repair.
The electrically driven propulsion and nozzle elevation system offers ride-on capability as well as easy adjustment of the nozzle height, for optimal drying and safe operation.
With various nozzles available (from 20-120 cm) the drying speed can reach up to 6 km/h. The average fuel consumption is only 22 litre per hour (more than 70 minutes on a fuel tank).
The M150 Easy Dryer offers many of the same advantages as our well-known Zirocco-M100E and Hammer Jet including our high-end Telematics system. The Easy Dryer is offering improved air filtering and fuel system. The electrical proplulsion system enables use of a ride-on-attachment that will decrease operator fatigue.
The turbine service intervals are 100 hours for optimal performance and expected turbine lifetime of app. 1000 hours. The turbine module can be replaced in few minutes.
The Easy Dryer will be available for sale from September 2022, but pre-orders are accepted.
|Drying speed||Up to 6 km/h|
|Drying widths||20- 120 cm - delivered with a 30 cm Nozzle|
|Electrical features||Nozzle elevation, propulsion and work lights|
|Replaceable nozzle||The various nozzles can be replaced and installed in a few minutes|
|Nozzle variations||20, 30, 40, 50, 60, 70, 80, 90, 100, 110, 120 cm and crack drying nozzle|
|Display, Telematics & GPS system||4.3” 4-button display with Zirocco Telematics and 4G antenna|
|Telematics features||Remote overview of GPS tracking, operation hours, fuel level, service timer, operation temperature, number of starts, battery voltage, diagnostics parametres etc.|
|Fuel tank capacity||33 L - 22L/hour on average (app. 75 min. operation on a full fuel tank)|
|Air filter setup||1 pcs. Cylinder filter (25 hours each) + 1 pcs. pre-filter (2.5 hours each)|
|Nozzle temperature range||App. 500-580°C|
|Fuel specifications||Standard Diesel EN590 or Exxsol D80 Petroleum/Kerosene + 3-5% Zirocco Turbine Oil|
|Battery & charging||2 pcs. Makita 40V, 4 Ah batteries (App. 1.5 hour run time) & 1 pcs.Makita 40V charger|
|Trolley capability||A trolley is available as ride-on-attachment|
|Dimensions & weight||L: 125 cm (180 cm w/trolley) W: 70 cm (75 cm w/trolley) H: 122 cm - 110 kg excl. fuel|
|Max noise level at 100%||108 dB LWA|
|Operating temperature||-10°C to +40°C (23°F to 104°F)|
|Turbine module service interval||100 hours (recommended yearly) of the 15 kg turbine module|