The world´s most compact and versatile jet surface dryer
The lightweight and ergonomic design with the new Hover Nozzle (patent pending) offers improved drying performance and a comfortable work position due to the hover effect of the nozzle.
This 23 kg and portable jet dryer is easy to always have on site for many tasks within different industries.
With embedded Telematics, a new rugged 4.3” display, a brand-new filter concept, and the use of an external Makita battery, this machine is the ultimate drying tool for industries requiring outdoor surface drying.
Examples on the utilisation are as follows:
- Line marking – drying and cleaning prior to marking jobs at car parks, roads, runways and aprons
- Crack repair and joint sealing - drying and cleaning prior to sealing
- Tape application and removal – heating of the surface and the tape adhesive for better quality and easier removal
- Roof top waterproofing - drying of the roof top surface prior to waterproofing
- Roofing felt heating – heating of the felt and surfaces with non-flammable hot air
- Railroad switch de-icing – quick heating and cleaning of the switches with non-flammable hot air
The Hammer Jet enables a drying width of 15-20 cm at speeds up to 2.5 km/h.
The various nozzle types and sizes are easily replaceable and ensure optimal performance on the specific drying, cleaning and heating tasks.
The average fuel consumption is only app. 12 Litres per hour (15-25 minutes of operation on a fuel tank).
The turbine service intervals are 100 hours (yearly service recommended) for optimal performance and expected turbine lifetime of app. 1000 hours. The turbine can be replaced in few minutes.
|Display, Telematics & 4G GPS||4.3” four-button display with Zirocco telematics and 4G antenna|
|Drying speed||Up to 2.5 km/h - cover up to 625 m (2,000 ft) on a fuel tank|
|Operating temperature||-5°C to 40°C (23°F to 104°F)|
|Nozzle temperature range||App. 350-570°C (662-1058°F)|
|Drying widths||5-50 cm (2-20 inch) - delivered with 20 cm/8-inch Hover Nozzle|
|Replaceable nozzle||The pat. Pending Hover Nozzle can be installed in few minutes|
|Fuel specifications||Standard diesel EN590 or Exxsol D80/Shellsol D70 petroleum/Kerosene + 3% Zirocco Turbine Oil|
|Fuel tank capacity||3.8 L (1 Gallon)|
|Fuel consumption (average)||12 L/hour (3.2 US gal/hour) - from 15-25 min. operation on a fuel tank|
|External battery & charging||Makita 12V, 4 Ah (App. 1.5 hour run time) & Makita 10.8-12V charger|
|Start-up time||App. 40 seconds via use of the start button on the display|
|Max. noise level||108 dB LWA|
|Air filter setup||1 cylinder filter (app. 25 hours run time) + 1 easily replaceable pre-filter (app. 2.5 hours run time)|
|Dimensions & weight||H: 152 cm/60 inch W: 37 cm/14.5 inch - 23 kg excl. fuel|
|Turbine module service interval||100 hours (recommended yearly)|
|Transport & storage box||Hammer Jet Main Transport Box (20 kg) 143x47x56 cm|
|Display features||Power level, nozzle temperature, current run time, turbine operation hours, battery voltage, time to next service, turbine states|